Quote:
Originally Posted by JordanWho
Anyone successfully done this yet on a Australian GTS? I had my front bar/lights out and paint ready to perform this today, but after seeing how many electrical components were inside the housing I quite honestly bitched out. Our GTS model has LED DRL's and auto centering motors, all of which will have to go in the oven. Wasn't too game to risk it....
|
I got a replacement pair, except they have a difference find than the author level motor. They only bake at 90c, the LEDs will be fine, just remove the HID lamps and ballasts.
I've toyed with the idea of putting them back in without the auto levelling system, or I'll swap the motors over. I'm just insure about the way they actually level, in tea of design the motor run all the way in, then all the way out and find its centre point. /confusion.