|
I was worry about messing everything up when I wet sand then red coat before applying the clear. However, I followed the instruction in the Diy thread and they say that we dont have to worry, clear coat will bring the shine and gloss back.
Evrything looked perfect after the clear was dry/cured but there was tons of orange peel/uneven level because of the home job. Thats why we have to wet sand to remove the orage peel to make the surface even/remove small dirt/hair sticked to the paint.
After sandding everything down. I started with rubbing compound to remove big scratches and followed with polishing compound for thinner scratches. Now you will see your job looks just like it just came out from the factory. Lol and just a thin layer of wax to bring up the shine/gloss. Thats it.
Good luck.
|