Quote:
Originally Posted by SMOKETREES
What's the install time on these? Lot of labor so to say? I wanna make my axles "very happy" is how they say it..... @ TylerLieberman can you chime in if you know.... Would these help a little bit if we don't have upgraded LCA's
Sent from my HTC One |
These will be getting installed on my car sometime next month. Both the subframe and diff risers.
The subframe risers will raise the subframe around 5-10mm. The diff risers will raise the diff up by about 20mm. So in the end, the axles are moving up by 1", maybe a hair more.
That will definitely help take some load off the axles.
As far as LCAs go, I have Stance LCAs and I noticed no difference in axle angle from before and after the install of them. The LCAs don't really do anything for your axles. They're meant to allow you run a lower height without sacrificing so much shock travel.
I'm curious if the risers will affect the ride height/alignment of the car at all. I'll make sure to post info on it.
If you want to see the install/updates on it and stuff, or ask any questions, feel free to check out my build thread. Loads of information in there. I try to answer every question as best as possible.