Quote:
Originally Posted by tjohnson104
I was really close to making one and nice pictures, but working on the floor with jack stands made it super hard. and I couldnt see half the time... Word of advice for anybody going to install this on their own. You will have a very hard time pulling off the factory rubber boot without tearing. I ripped mine. But they supply a new one. And if you can, remove the drive shaft. Everthing is directly under it, and made everything way harder having it there. And most importantly. Use lots of soapy water or some type of oil to get that stupid black plastic filler on the adapter so it can slide easily over the connecting shaft. that is going to be the most pain in the ass for anybody installing themselves. good luck. you have been warned.  |
Another reason for me to get that carbon fiber shaft
