Guys I'm trying to figure out if these replacement for the FRS low beam which are halogen bulbs inside the projectors work ok on intensity beam and length.
I've checked and have found some cree LED Replacements which coem with a back plate heatsink for proper power discipation but I don't find them quite reliable with a fan on the backside. This is the one
http://www.ebay.com/itm/Cree-CXA1512...item43c6313d55
Then this is the one I might be getting my hands hold off
http://www.ebay.com/itm/301076976468...S:1123&vxp=mtr
Some people have said that these leds within the projector housing do not reflect well enough the led beam cause of the optics which were designed for halogen bulbs. Don't know if that's true. Like the guy who sells both of this cree bulbs told me to get the one with the heatsink cause of that. Basing himself that if I get the 60 watts cree if would not be as bright and the beam wouldn't be so focused.
Anyways I'm opened to listening to your advices.