Quote:
Originally Posted by 4azcats
I also started this project for @ 4azcats stock header no heat shields with the cat punched out. This along with the minor exhaust changes should be interesting. It should also be interesting to get him to do said mods. …….
Well, I'm going to start calling you guys "The Mod Squad". After reading the following posts you'll have to do a hard "CEL" on me to modify the exhaust-don't want a CEL!
You'll be happy to know I did order the shifter bushing set as well as the sharkfin antenna, so I'm taking baby steps.  |
It's not even so much the cell being on that is the problem. The system can get stuck in a rich condition like 12.5:1-13.5:1 while in closed loop and mpgs start to plummet. If you have EcuTek though it's easy peezy to remedy.