Quote:
Originally Posted by ATL BRZ
Pics or a DIY for this would be great, as well as part number for a bypass coupler.
|
Doesn't need a new part, just unhook the radiator tubing off the TB and route back into the system, just bypass the TB altogether. Not recommended in VERY cold climates though, the reason the radiator passes through the TB is so the butterfly doesn't freeze solid and can open/close.
** go through my build thread around where I bought my TODA big throttle body, it will show the pipes for the radiator hosing, just don't connect those up.
UPDATE: Found it
Pic courtesy of @
MAPerformance
Just install the TB like that...WITHOUT hooking up those two connectors. Easy done. One of the hoses *should* be long enough to plug it back into the radiator system.
