Quote:
Originally Posted by dssence
hey I do really apreciatte all your thoughts about my mods. To someone who said stop trolling or posting dumb mods . I' not doing anything without having any sense , I'm doing it with good spirit but ppl sometimes think it's just a matter of doind things worse. Anyways to all the ppl who are being cool thanks so much.
Now what do you think doing red tail light overlay would be best? I wanted to do some vinyl work on the tail basically without having to add a rear spoiler, I might be lost, could be. But If I don't get any tips or hints from you guys those are the ideas i'm coming through and i've been all nite playing around with lines. It's not that I'm a stupid guy doing bullshit.
|
Red overlays for tail lights. Basically just a vinyl overlay that covers the tail lights. That or paint them red. Both are very easy to do.
Below is a post taken from another thread to help you.
Process
Prep clean Mineral spirits with nitrile gloves
3 light layers VHT NiteShade Red
3 passes heat gun in between each layer
1 Heavy layer VHT Niteshade RED
Wet sand 1500
Wet sand 2000
5 layers Krylon clear coat
3 passes heat gun in between each layer
2 heavy layers clear coat
Dry for 24 hours
Wetsand 2000 grit
Hand polish rubbing compound
Wax
tip: if you find specks of dust in between layers. do not touch it. let it dry a little bit more and with passes of the heat gun. then use Masking tape to pick off any specks of dust before proceeding to spray more layers.
I might remove the wax and polish it with a portercable as i don't feel it is glossy enough. if all else fails I'll bring it to a shop for a coat of clear coat.