Quote:
Originally Posted by FRS-AZ
Steve,
I did install the beta version of ecuflash, ROM is stage 1.bin from OFT but 32bitbase not sure but I believe I did. Just now, I tried to reflash stage 1 it complete but still error. The car starts but in limp mode with check engine light on. I will attach the log file.
|
I am pretty sure you need to manually copy in the 32bitbase file
https://github.com/TD-D/SubaruDefs/t...standard/Bases
Also read here
http://www.ft86club.com/forums/showp...&postcount=408
re waiting after beeps
When using EcuFLash, connect the cable, click on "read rom" (or "write"), the prompt will ask you to turn on the ignition - do turn on the ignition, wait until the bipping stops (i think 5 bips), then wait another about 6 seconds, only then click on that pop up box confirming that the iginition is "on".