Quote:
Originally Posted by z3ro
BRZ does it, FRS only sweeps to your set RPM.
For FRS put it in the ON position, not start. Toggle through display until you get to a bunch of zeros. Hold down to set the first number (1000's), then hit once to go to hundreds and set that. Then hit one more time to confirm, leave the buzzer off (its effin annoying). Turn car all the way off, then back to "ON" and it should sweep
|
i kinda like the tach beep.. it means i don't need to look at the gauge cluster to know when i've hit my shift point.. but currently my shift point is set at 3700. once i move it up to 6000, i should have less of that issue..