Quote:
Originally Posted by tbrocato
I posted another thread about the weight of the wheels...I should of attached it on this thread! If I was to go 18 X 7.5...would I need to do anything suspension wise on the vehicle? I am a noob when it comes to anything about all the setup stuff on aftermarket wheels.
|
You wouldn't have any problems clearance wise. In fact, the wheels would still look tucked into the wheel wells, so you might even need spacers to bring out the wheels a bit. These wouldn't do much for the gap either, depending on the tire diameter you go with, so you'd still need a drop to get rid of the gap in the fender well if that's what you're going for. So springs + spacers is a must if you want a flush look with these wheels.