02-06-2014, 04:21 PM
|
#45
|
|
Banned
Join Date: Jan 2012
Drives: Attitude
Location: MD
Posts: 10,046
Thanks: 884
Thanked 4,890 Times in 2,903 Posts
Mentioned: 123 Post(s)
Tagged: 4 Thread(s)
|
Quote:
Originally Posted by CSG Mike
We may have purchased a single OEM spring to test the rate... we were going to increase our redline until we had it in our hands.
Remember, we come from Honda backgrounds... we like high redlines.
|
Quote:
Originally Posted by DAMotorsports
Mike we would have given you the information about the springs as we have posted about the poor spring which are in the FA20. We found they have an install pressure of 35 lbs and at .005 lift it was 55 lbs. The rocker designs in similar to the 2AZ motor. However we have some advantages over the 2AZ uses a hydraulic lifter and the rocker arm has a slightly smaller pocket for the valve lash cap and lifter. The FA20 uses a solid lifter and the rocker that has a touch deeper slotting. We meet with Papadakis Racing last week and compared the 2AZ stock part, their upgraded 2AZ kit and the FA20 parts. At this time the best solution to control the rocker is to upgrade the springs as we have already done.
|
•Gracias seņores!
|
|
|