[jamesm]

you can set up proportional, integral, or a combination of the two. so you have to set up a boost target map, a base WG duty map and get that dialed reasonably close, then set up proportional and/or integral comps to nail it down hard. this is all done with custom maps and can be done absolutely any way you like. also remember to set the duty cycle on the valve in the rom to that of your ebcs, probably around 35hz.

to change the boost you'll just input a new boost target into the custom map, but there's a lot to do before you get there.

ecutek doesn't really have 'boost control maps', they have maps to modify the CPC valve function that happen to be labeled 'boost control' since that's what they're commonly used for. ecutek's docs even suggest that you shouldn't use that, and use a proper proportional/integral setup with custom maps instead. if you don't have racerom you could use them to set up a basic wg duty map, but unless you have a specific reason to limit boost intentionally it'd probably be better to just use an MBC without the integral/proportional compensation.