Quote:
Originally Posted by Chen
You know it requires any cutting or anything to install this kit?
|
Most people will tell you the most difficult part of the install is drilling the bumper beam for the intercooler mounting. It does require a decently high powered drill and good drill bits, as the bumper beam is strong, solid steel. Other than that, it should be as easy or easier than every other system out there. We list 6 hours on the install. Some people have done it in less, some people have taken longer. If you would like, you can preview the entire installation manual
HERE.
If you have any other questions, I would be happy to answer them. In addition, many of the enthusiasts on here running Vortech systems are extremely knowledgeable as well, and quick to help out when needed. (Thanks guys!)
