Quote:
Originally Posted by HapaHaole
Yes you can go find a connector pin from a harness and Pin your own wires into the connector.. That is what I am going to do. I am going to buy the camera with the wire harness then use a factory wire repair kit that has the wires with the pin in them and install the pin and solder in the wires to the camera wiring.
Therefore I don't need to by the SVDX harness.. I am going to use the pin out information from a 2012 forester with the same head unit. Keep in mind There are NO wires sticking out of the connector so you basically have to install the wires.
|
I ended up buying the harness. I figured after buying the materials (soldering iron, RCA male plug, wire, and whatever else) and the time spent to complete this, my savings is minimal. Plus, I wanted the Option harness he sells to get the 12V lead since my cam is 12 volts, and will use the 6v lead as my trigger to a relay.