Quote:
Originally Posted by HapaHaole
The vehicle never came with that option so there is no wire harness to solder into.
|
Yes, but isn't there an existing plug in the same harness where the camera would go (if equipped) just without the wires for camera input\power? I thought thats what the svx.dc harness replaces, while adding the wires for camera input. I just need to know if the factory plug can be dismantled so I can solder an RCA input lead. Have you done this install yet or are you guessing?
Quote from this thread:
http://www.ft86club.com/forums/showt...=backup+camera
Quote:
|
The SVXdc harness consists of a 16-pic connector which attaches to the back of the head unit (replacing the factory 16-pin connector). The other end contains an RCA composite video IN (female), a head unit power wire (red wire with yellow stripe, labelled "+6V to cam", and a fork terminal wire which is meant to be attached to ground). You will need to strip about 1/4" of the end of the head unit power cable using the wire stripper to expose the metal core.
|