Quote:
Originally Posted by markmatley
Thanks! I tried to pry apart the backing after taking every clip off. I guess I have to go balls to the wall and pry the needles off.
|
If you haven't taken the needles off yet, WAIT! The refrence photo is a good idea, but better yet, get some blue painters tape, turn the needle to it's stopping position, next lay a piece of tape down under the tip of the needle, then mark the position with a sharpie, lastly pry the needle off. The blue tape will leave no residue and you will have a more precise mark to go off of than a photo.
Source: I work as an Automotive Electronics Specialist and remanufacture a lot of gauges..