|
Correct me if I'm wrong but those shims are for adjusting bearing preload not pinion depth. Pinion depth is set by the size of shim between the pinion gear itself and the inner bearing not between the inner and outer bearings.
Sent from my Nexus 5 using Tapatalk
__________________
2013 SWP BRZ sportech. 11.11sec@129.01mph, 511whp on e70. FullBlown base kit, FullBlown built 9.5:1 engine, GTX3076R GEN2 turbo, 1700cc Bosch injectors, FullBlown flex fuel kit, FullBlown radiator and oil cooler, FullBlown custom 3" dual exit exhaust, act xtreme clutch, whiteline diff and subframe inserts, BC Racing coilovers, hotchkiss 18mm rear sway, is300 3.73 differential ... Never finished
|