Quote:
Originally Posted by milkesfrs
Power Lock = blue wire located on the driver side kick panel, white 22 pin plug, pin 16
Power Unlock = pink wire located on the driver kick panel, white 22 pin plug, pin 15
I could not get my door locks to work for my setup without the second bypass module. The FRS has its door lock circuitry controlled by the car’s computer data bus. In order for the remote start Fob to integrate with and control the door locks (which may be necessary in order for the remote car starter to interface with the vehicle’s security system) a Door lock bypass module is needed.
If you remote start first the fob will work. After the car shuts off the car’s computer data bus will time out after 10 or 15 min and you fob won't work anymore. My fob did the same thing until I got the bypass.
|
I just finish hooking up my viper 5704 today. The only way to get the power unlocks/ lock is to tap into those same wires that you stated and to disable the factory alarm. The trunk poper, door unlock/lock, the remote starter, everything works perfect!!! Thank god! Only thing left to do is to hook up my window module. Btw can I get both left and
Right side window motor from the driver side door
Panel? If so what color wires?