Quote:
Originally Posted by whataboutbob
And the twisting motion won't over tighten the plastic parts and make them loose.  Oh yeah, and you won't need to pull the blower to replace them. Just cut the old ones off in place. |
can you get to the allen keys bolts with the connectors you have used.
The L Connectors are almost directly infront of them making it difficult to get too even with the ball end allen key.
i also noted that the brake boost connector, no matter how many times i sealed it, due to heat it still comes loose. This time I have used plenty Teflon and loctite, seems to be holding out.