|
Hmmmm, not sure. We just stuck the resistors inside the plug and taped them. Once the seat sensor was plugged in the light went off. With the sensor folded up under the seat the pass airbag is on all the time. I had to have the dealer turn the chime off for the seatbelt but that was it.
I was planning on having someone actually install it in the new seat but have not gotten around to it.
On means it thinks someone is in the seat, off means it thinks nobody is there.
To make sure everthing is right you could try and put the factory seat back in the passenger side (with the sensor plugged in). If you did the resistor correctly there should be no lights.
That will tell you it is an issue with the seat sensor.
|