Quote:
Originally Posted by Ryan86
It's certainly got the better of me over the last 4 months.
I am doing R&D with the agent in SA, whom is liaising with Sprintex. We were one of the first to get the new kit unfortunately.
I've had 2 specialist install the kit and check it out, both failed.
Since I've taken it off And understand how it works what to look for and what each component does,I and able to sort myself out. so as the saying goes, if you dot know how to fix your mods you don't know how to mod. 
I am a little concerned with the Blue Gates belt on the 75mm pulley it might be too tight, so I'm going to go back to the standard belt, to ensure kit runs properly.
Also fair warning don't over tighten the Allen key bolts on the charger as those bolts are very thin and strip easy.. |
You need to teach me how to be patient like you.. lol.
This is why I ALWAYS do things myself. Now that you have pulled it apart, you know what you are doing and can take the time to do it yourself and not have to wait for a shop to figure it out, and on your dime.