Quote:
Originally Posted by brn12345
Okay, So I was on the dyno for the 2nd day, had already flashed various maps many time (probably 9-10 flashes of different maps). On the last flash before the error, I replaced one of the 5 loaded maps on the device with the OFT Stage 2 1.42b map and uploaded it to the device. I then flashed it to the car and it went through fine. I then wanted to make a change so modified a map and tried uploading to the device through OpenFlashManager and I got the 0x63 error (you cant see the general car info or the 5 maps, they are all blank as if the device couldn't be read). I tried erasing the device and it gave me a message that the device could not be deleted. I tried connecting to the car and it gave me a message that the device is not compatible. Basically now the only thing I can get the device to do is download and view logs through the OFM software.
|
Please email me the user LOG file. It will help us figure out what exactly is happening. Also please email me the map that you modified and tried uploading to the OFT which caused the issue. Just to confirm the problem occurred after you uploaded a map to the OFT. Nothing to do with the actual ecu flashing process?