Quote:
Originally Posted by post_break
Did you use smaller bolts on both the upper and lower? Sorry if you said this already, I just couldn't tell. Sorry I can't help with locating the insert, I've seen them before included with other coils. Essentially turning a smaller bolt into an eccentric bolt.
|
Lower hole can only use the smaller 14mm bolt in all cases. Upper hole comes stock with a larger 16mm shoulder bolt. A smaller 14mm OEM "camber bolt" can be used in place of the 16mm bolt in the upper hole and happens to have the same part number as the 14mm lower bolt. I used the smaller bolts on the upper holes initially, and they slipped. Swapped the stock 16mm shoulder bolts back into the upper holes, and they're holding up fine.