Installed the Stance LCA's and got an alignment today.
I installed the control arms and dropped the car and was sitting at this height:
A bit too much for me seeing how the axle angle was extremely jacked up and there was still not much suspension travel. So, I raised the rears up by about half an inch and got to about the same ride height as before.
After that, I went and drove it around and could tell that it was definitely off alignment so I went and got it taken care of. Unfortunately, the stock toe links are maxed out so the best I could do is -1.8 camber in the rear while still maintaining zero toe.
So I'm going to get some SPL Titanium Rear Toe Links to help get the extra adjustment I need and I'll end up going back down to -1.5 camber with 0 toe again.
So now the car is all good for me to drive around on until I leave. I can't wait to start getting everything ordered for the car. It's going to be amazing when I come back.
In the meantime, I have a few parts that I'm going to be installing on my wife's car next weekend ('13 Focus ST). I'll post some pics of that I suppose