Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Official OpenFlash Tablet FA20 Tuning Tech Discussion Thread

solidONE · 01-03-2014, 06:07 PM

So I went ahead and re-scaled the MAF input + 5% across the board, and the results are pretty good. The LTFT will go up from 0% to 5% at about 3.5v from the MAF sensor. I have increased the numbers past 3.5v anothre 5% and I expect the LTFT to be even better. Will take logs later today.
http://www.datazap.me/u/solidone/5-m...?1-2-3-9-10-11

Quick question @shiv@vishnu. Is there a good reason why the target AFR are so rich @11.25 AFR? What would happen if I enlean the target AFR's closer to 12.0 afr?

01-03-2014, 06:07 PM	#778
solidONE Senior Member Join Date: Dec 2012 Drives: FR-S Whiteout Location: California Posts: 2,863 Thanks: 1,808 Thanked 791 Times in 611 Posts Mentioned: 42 Post(s) Tagged: 0 Thread(s)	So I went ahead and re-scaled the MAF input + 5% across the board, and the results are pretty good. The LTFT will go up from 0% to 5% at about 3.5v from the MAF sensor. I have increased the numbers past 3.5v anothre 5% and I expect the LTFT to be even better. Will take logs later today. http://www.datazap.me/u/solidone/5-m...?1-2-3-9-10-11 Quick question @shiv@vishnu. Is there a good reason why the target AFR are so rich @11.25 AFR? What would happen if I enlean the target AFR's closer to 12.0 afr?