Quote:
Originally Posted by irvin1958
Greddy CAI, Motive Hi-Flow Cat, Perrin Resonated exhaust- all this was provided for the pre-installed maps.
Shell 91 Octane, 10% ethanol
Running maps shipped with the Unichip- no changes as yet- still testing.
|
So which maps were installed from UNICHIP? In otherwords, which is in position 0 and which is in position 1?
I'm curious if you are running Greddy CAI with Fuel Standard and Timing Standard in 0.
And in 1, maybe Fuel Out and Timing In or Fuel In and Timing Out or Both Out or Both In?
Also, the gas you have - do you have Winter Gas or Fall Gas. Do you even know? And is it Shell brand or which brand?
All the above makes a HUGE difference.
I've run about 40 tunes with tons of different gas combinations here in Chicagoland.
You might want to plug your laptop in and flash Greddy CAI with Fuel Standard and Timing Standard in 0. And in position one, Stock+ Fuel Standard, Timing Standard. This will help gauge the extremes of what is going on.
You might want to pick up a Flux2 as well to monitor your intake temperature, your RPMs as well as your Engine Temperature.
This also alows you to reset your CELS.
I'll try to help, but need more info - especially state and temperature the last few days.