|
To cover the signals was simple,
1) First tape the the square with one color tape (I used green painters tape)
2) cover the inside with maybe 2 layers of blue tape
3) lift the green tape which should also lift the blue since it's on top
4) flip and cut the green out (this should leave the signal shape left)
5) stick it back on the tail light and repeat process for the other side
I used 2000 grit to smooth everything out, just don't over do it, you can't feel it on mines, just take your time when doing ur tails, buy all the stuff the day before and wake up early the next day if you need your car ready for next day.
|