Quote:
Originally Posted by ztan
Will be interested to see datalogs with all the knock data.
I've gone back to my stock ROM from the Vishnu 1.3x maps (with the lowered knock correction advance tables) after getting quite a lot of knock in the 2000-3800 range with 0.5-1.0 load. No knock at WOT, but a bit of daily driving was pulling my IAM down.
I'm going to back up to scaling injectors and MAF before trying other maps again.
In RR, I've got defs for "Injector scaling" and "Injector scaling BRZ" - does anyone know if these are for port and direct respectively or how best to go about scaling these seperately?
Datalogging, I'm pretty sure the FFF887C8 address logs port injection, will have to try some of the other addresses to see where direct injection data lives unless someone has it to hand.
|
I think both are port scaling - the one I defined originally has the same logic that I've seen over and over in the roms - but it was pointed out o me ht the other value is that defined by oft and brzedit as the scaling. I would be interested to hear feedback from someone whether my original scaling does the job.
If you guys can put together a request list of parameters required, I can start trawling around for addresses (once I'm back from holiday
)
Sent from my iPad using Tapatalk HD