Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - ECUFlash

ztan · 12-14-2013, 04:24 AM

Will be interested to see datalogs with all the knock data.

I've gone back to my stock ROM from the Vishnu 1.3x maps (with the lowered knock correction advance tables) after getting quite a lot of knock in the 2000-3800 range with 0.5-1.0 load. No knock at WOT, but a bit of daily driving was pulling my IAM down.

I'm going to back up to scaling injectors and MAF before trying other maps again.
In RR, I've got defs for "Injector scaling" and "Injector scaling BRZ" - does anyone know if these are for port and direct respectively or how best to go about scaling these seperately?
Datalogging, I'm pretty sure the FFF887C8 address logs port injection, will have to try some of the other addresses to see where direct injection data lives unless someone has it to hand.

12-14-2013, 04:24 AM	#330
ztan Senior Member Join Date: Jul 2013 Drives: Toyota 86 Location: Gold Coast, Australia Posts: 311 Thanks: 44 Thanked 361 Times in 145 Posts Mentioned: 60 Post(s) Tagged: 0 Thread(s)	Will be interested to see datalogs with all the knock data. I've gone back to my stock ROM from the Vishnu 1.3x maps (with the lowered knock correction advance tables) after getting quite a lot of knock in the 2000-3800 range with 0.5-1.0 load. No knock at WOT, but a bit of daily driving was pulling my IAM down. I'm going to back up to scaling injectors and MAF before trying other maps again. In RR, I've got defs for "Injector scaling" and "Injector scaling BRZ" - does anyone know if these are for port and direct respectively or how best to go about scaling these seperately? Datalogging, I'm pretty sure the FFF887C8 address logs port injection, will have to try some of the other addresses to see where direct injection data lives unless someone has it to hand.