Quote:
Originally Posted by Rinn310
With age comes wisdom... And apparently a knack for knowing how to get stuff done the easy way. Luckily I have access to a car rack and can get it in the air for free, so no laying down on the ground for me.
Sent from my XT1080 using Tapatalk
|
Ahhh......yes, with age comes wisdom (or maybe just being lazy.....
).
So, if you DIY, I suggest a bit of WD-40 on the two nuts. Work a bit of liquid slippery stuff (I prefer soapy water) around the rubber hangars on the muffler. After taking out the two bolts, the muffler will rock on the rubber bushings to loosen them up. Oh, yes be a bit careful with the gasket, they don't give you a new one.
Well, that was enough, I let the boys with a rack .... take er on in.....
humfrz