Quote:
Originally Posted by Malt
You'll have to excuse my ignorance on the subject but is there anywhere I can read up on what to change and by how much to resolve this issue?
Our do you have any tips on where to start at?
I just left the house an hour ago and had to attempt to crank three times before I got it started and it's only 45 degrees out atm. If I can't get this resolved I'm just going to put the BRZ in the garage and drive my other car on days I have to work because I can't risk not being able to start the car in the morning when it's time to goto work.
|
You will need to use romraider for now, or wait till shiv updates the xdf to include the 3d cranking pulse width tables.
Start by setting the Cranking RPM table back to all 0.00 then multiply all the of 68*F (20*C) columns by 1.2, all of the 50*f columns by 1.25, and all of the columns from -40*f to 32*f by 1.3. Then you can just tweak the cranking table as needed. I was a little more aggressive with my rom..
In atlanta all i needed was the cranking rpm table setup as shiv has it in the base rom, but here in socal it was not sufficient to crank on the first try. Td-d was kind enough to find these 3d tables for me and they work great. It seems there is a limit to the amount of enrichment the rpm based table will provide.