Quote:
Originally Posted by Boosted69
I have a question. All of this is based on a 24v or 28ah setup. would you be able to add additional voltage say bring it up to 36v?
Would that get you more rpm in the motor and thus a few more PSI?
I'm asking for future use. if I needed to make more boost with this system all in place. Or because the controller is 24v setup thats all you can run. I would have to change motor or compressor accordingly?
|
I'm not sure of all the specs of the phantom system, but most likey to operate at a higher voltage would require a different motor/controller/charger.
Also this system is pushing the limits of max RPM of these type of motors. As the motors get larger even though power goes up, max RPM generally goes down. One option would be to switch to a larger compressor with a larger motor turning at a lower RPM.