Quote:
Originally Posted by m.wood0213
Not that Ive found. Im waiting for FlashLogic to release a flash for the keyless entry and start so I can use a Viper remote start and security.
|
Quote:
Originally Posted by kuhlka
In the meantime, did you enable the factory alarm?
1. Turn the ignition to ON (all lights light up, but car isn't running, two presses of the button)
2. Press the lock button on the driver's door.
3. Press the unlock button on the driver's door and hold it. Open the door and wait 10 seconds while holding the unlock button.
4. The car's horn should beep and either "AL on" or "AL off" will display on the dash.
If you want to test the alarm, roll your car's windows down. Take your fob about 20 feet away (leave it in the house out of range of the sensor). Lock the car using the fob. Set it down. Walk over to the car and use the physical unlock button or switch on the door to unlock it. When you open the door, the alarm will go off. Sprint back to your fob before your neighbors get pissed.
|
Thanks.. Already done. Just sucks leaving the car unprotected with all the goodies on.