Quote:
Originally Posted by Cahue
Not sure if this has been asked before and it's kind if hard to navigate the forum through my phone.
I have a friend who installs security alarm and remote starts. He said the viper Alarms have no current module for the brz due to the remote start. He said he can give the alarm a try but didn't guarante it. Has anybody secesufully installed a security alarm? If so, what brand and model of alarm? Also was it in a premium, limited or scion?
|
In the meantime, did you enable the factory alarm?
1. Turn the ignition to ON (all lights light up, but car isn't running, two presses of the button)
2. Press the lock button on the driver's door.
3. Press the unlock button on the driver's door and hold it. Open the door and wait 10 seconds while holding the unlock button.
4. The car's horn should beep and either "AL on" or "AL off" will display on the dash.
If you want to test the alarm, roll your car's windows down. Take your fob about 20 feet away (leave it in the house out of range of the sensor). Lock the car using the fob. Set it down. Walk over to the car and use the physical unlock button or switch on the door to unlock it. When you open the door, the alarm will go off. Sprint back to your fob before your neighbors get pissed.