Quote:
Originally Posted by tiny41
I have a slight rattle when taking off with my Perrin. When I had the dc sports, the rattle was unbearable.
The gap between the pipe and the frame was extremely small like less then a cm on both pipes. Not sure why the dc rattled so badly.
Can someone explain why the heck are the pipes shaped so close to the frame when there is plenty of room in the area above where the pipes are routed.
Could avoid the rattle in all cases by just bending the pipe a bit higher then usual.
|
Different brands are made differently. Perrin has noted on a few folks to have a different bend causing it to be closer, then as you state a rattle. The Avo OP I bought was pricey, but I also knew 100% there would be clearance due to their R&D on the piece, I didn't want to be irritated so I paid the piper..?
