Quote:
Originally Posted by #944_10_Series_FRS
Good job with the paint. However, my question to you as follow since you start this project with unprinted spoiler,
1. Did you use adhesion promoter before you put on the primer?
2. And did you use the primer at all before the base coat?
If you don't use the listed above, I am not sure how long your spoiler paint will stick on.
|
I sanded the bumper when I first got it so it was smooth as glass. Next I used two coats of a primer meant to bond to that type of plastic. then I did 4 lays of base coat and 3 layers of clear. I'm pretty sure the paint won't be falling off.