Quote:
Originally Posted by imom
Is it possible to bend the pipe from the FXT pipe (21328AA220 - PIPE, OIL COOLER) to same angle as the original BRZ oil pipe? Or even better if someone can make a new or modified BRZ oil pipe cooler to use with the FXT oil cooler
|
Kostamojen answered your other questions, but I suppose with a pipe bender and some time you could bend the rear-facing tube to be straight up. Or you could try to cut the bent part off and add a new bead to the pipe then install the heater hose.
Other option would be to weld a pipe to fit a 3/8 inch hose onto the BRZ water pipe near where the oil cooler hose would join the FXT pipe.
I went for a bolt-on solution and thats why I used almost all of the OEM parts without modification.