Quote:
Originally Posted by JPxM0Dz
Have you tried reflashing back to stock, then the tune again ?
|
He was on 1.2 prior to this. Will have him downgrade to 1.2 then to stock before back to 1.3 to see if CEL still exist.
Quote:
Originally Posted by shiv@vishnu
Sounds like a connector on the transmission was unplugged when the header was installed.
|
We will check on that tmr but we didn't take any connectors off except for the o2 sensors. I'll have him flash back down to 1.2 to see if the CEL pops up again then back to 1.3 if it doesn't. But if it does pop back up, do you know where exactly the connectors would be located? All we did was loosen the bolts on the front pipe/overpipe to get the headers off. I doubt we hit anything to break off or loosen when uninstalling/installing the headers.
Quote:
Originally Posted by RSH
Thank you. reading these threads reminds me once again why I am thankful I do not live in California. Octane and emissions just a small part of that equation.
Does that mean that this build has already turned off the 2nd sensor?
|
It turns off the error code for the o2 sensor.