Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - MXP Equal Length Header and Dyno (updated fitment with skid plate, second post)

Fofofawcett · 10-23-2013, 07:27 PM

Fixed the overpipe rattle...went back to the unshielded stock overpipe. It went from resting on the frame to full on clearance all around. No more rattle now.
Video works now, below is a longer one that shows a better representation of the sound.

The sound is very interesting. I swear I hear a bit of uel rumble at low RPMs before switching to the classic el sound higher up. Awesome.

Here is an example (not the same run as above):
[ame="http://youtu.be/qdpwXfJqNGY"]http://youtu.be/qdpwXfJqNGY[/ame]

10-23-2013, 07:27 PM	#4
Fofofawcett Member Join Date: Feb 2013 Drives: GBS BRZ Location: Boston, MA Posts: 57 Thanks: 19 Thanked 38 Times in 20 Posts Mentioned: 4 Post(s)	Overpipe update Fixed the overpipe rattle...went back to the unshielded stock overpipe. It went from resting on the frame to full on clearance all around. No more rattle now. Video works now, below is a longer one that shows a better representation of the sound. The sound is very interesting. I swear I hear a bit of uel rumble at low RPMs before switching to the classic el sound higher up. Awesome. Here is an example (not the same run as above): [ame="http://youtu.be/qdpwXfJqNGY"]http://youtu.be/qdpwXfJqNGY[/ame] Last edited by Fofofawcett; 10-24-2013 at 05:35 PM.