|
This is what I did with mine, U need the 08+ Subaru custom brackets for the rear from the kns or fastwrx, dba 4000 T3 04+dual drilled front rotors , dba 4000 T3 dual drilled 08+ rotors , and also you need to swap the nipple bleeders to the other side , also the ss stoptechs sti lines
Let say the original brembo seals aren't good, then you also need to replace them, about $200 for both front and rear .
Basically it ..., I spent about $2000 for the whole project including the powdercoating job into a ice white finished with a starlight clear coat and the red lettering .
You can save alittle bit by buying oem rotor ... Shop around .
|