Quote:
Originally Posted by hanabie
Hard to remove? Most likely ur clear coat cured. Yeah it was a pain in the ass. You could sand it down or use alot of acetone to clean them. Yes they will come off. The edge will be challenging to remove. You might need to sand the edges. The cloudy look will be gone as soon as u apply first red coat. It is just gone.
Sent from my SGH-T999 using Tapatalk
|
Yep, I'm pretty sure the clear coat cured. I ended up sanding them down a bit to get a lot of the clear off, then using the lacquer thinner, and a TON of elbow grease. About 3 hours of constant scrubbing to get everything off. Back to square one! Tried to fix ONE little defect, and screwed the whole thing up, lol, just my luck.