What fuel, compressor rpm, and pressure was the used in the setup for the posted dyno? Will there be an option to get Jackson Racing's tune without buying an additional license and cable for those that already have an Ecutek tune?
I've gotta agree with my fellow Canadian, @
fenton those baseline numbers are really high. I'd say the torque is ~40 lbft high and the horsepower is ~20 hp high.
But, if you look at the percent gains that's about 44% increase in torque and 51% increase in horsepower. Just as advertised.
Adding those gains to the typical baseline of about ~120 lbft and ~165 hp, that should look like 172 lbft and 250 hp at peak on a dyno that would give the typical readings.