|
I have a Suntek clear bra on my bumper, 1/3 hood, and mirrors.
I regret not getting the fenders and rockers near the rear fenders covered because these areas have gotten chipped.
The suntek bra is invisible, but the installers I used F'ed it up. Suntek has proprietary cutting machines that cut out the templates for your car so the installer doesnt have to. Needless to say, it didnt cut out the templates to fit exactly...so I have unprotected gaps on my bumper where the separate pieces didn't abutt properly.
FURTHERMOREEEE on the hard corners and wierd angles, the installers screwed it up by using too much heat or stretching it too much, so there are orange peely spots.
Also, the pieces covering the mirrors are 2 pieces per mirror and the top edge looks like crap and is separating.
Finally, I'm pretty sure the installers I used didnt clean the surfaces beforehand because there is crap stuck between the bra and the paint.
Paid $750 + tints (tints flawless minus ~15 miniscule bubbles on back window). Worth it for the protection but boy am I unhappy with the quality of work. You can't see any of the aformentioned issues unless you are deliberately looking for them from within 3 feet.
Hope that helps your decision making process somehow
|