Quote:
Originally Posted by NyC Zn6
Recieved my shipment yesterday can not stress how satisfied I am with these foglights. Definitely recommend Diode to everyone. Quick question guys I want to connect the foglights to my side marker. From my knowledge based on the forum the red wire on the harness with the push pin goes to the white wire on the side marker? Where does the black wire on the harness with the push pin go to?
|
I sent you a response through a PM.
The video shows the method we recommend for the easiest installation, but they can be wired a variety of ways. It really depends how you want to control them.
As long as you connect to a signal wire that provides enough electricity to power the bulb and you ground it properly you should be golden
Again, the video is our recommendation for installation, but feel free to send us an email:
contact@diodedynamics.com or call us (314) 205-3033 for more assistance
I'm glad you are pleased with our fog light kit
Thanks,
Nick C.