Quote:
Originally Posted by Flat Black VW
I like this idea a lot. I can't stand the next track/previous track on the touch screen, so I will probably only do one switch for those two. Now to just figure out where I will put that one switch then I will get to work!
And just so I know im understanding everything correctly, if I were to do this I basically would want pin 21 as the input for the switch and pin 23 as the output. When the switch is in the middle position there would be no connection between these pins, in the up position for next track it would create a connection between these two pins with no resistor, and when the switch is pushed down it would create a connection between the two pins with ~330 ohm resistor giving me previous track.
As long as my understanding is correct this seems pretty simple, now I just need to find an on-off-on momentary switch lying around my shop to test it out.
|
That's correct.
If you have a manual transmission car, I would propose trying to get the three switch traction--snow/sport--stability control module and try to hack it to make the center snow/sport switch serve the seek function.