Quote:
Originally Posted by anthros
If someone with a caliper can measure a few dimensions, I'd be happy to draw something up in Solidworks. Ozzman just gave me the thread size. I'd need a photo of the uncovered tow hook area and the distance from the face of the tow hook area to the bumper surface.
I would also need the diameter of the engageable area around the tow hook threads to avoid the spacer issue that Ozzman mentions. Any takers?
|
Just get your tow hook out and thread it in and mark with a sharpie where it exits the bumper beam, From that mark to the end of the threads on the towhook is how long the bolt needs to be from the head to the end of the threads.
The 45degree angled shoulder on the towhook is where it bottoms out on the threaded insert, so your spacer needs to be the same length as the distance from the sharpie mark to the middle of the 45degree shoulder.