[WolfSongX]

Did a little bit this weekend in running power to the rear of the car. I'm using Knukonceptz cables and hardware.


I know some people think Tech-flex is overkill, but I prefer to be safe than sorry. I liked the brackets that I've seen on other builds so I decided to fab one up for myself.




I actually fed the cable up from the trunk. I used the sound tube opening which was too big on it's own for 4 gauge, so I decided to just pull it through in the split loom to fill in the space. I know some people have used the sound tube cut down to fill in the space, but I found that the Tech-flex made the cable too wide to fit through it, so the split loom was an inspired decision.






I did make sure to secure the cable on run back. I also used a bit of split loom going through the back seat into the trunk.




Run up into the roof of the trunk to my distribution block.




I like the end result which is subtle and out of the way.


Now I need to get something to hook up back here... I've been thinking of getting in on the group buy for the 10" Custom Sub Enclosures fiberglass enclosure, so I've been looking for an appropriate driver and from there, a 5 channel amp.