Quote:
Originally Posted by DNAPoPo
One last question, the amps I have in mind do speaker level inputs, would I be tapping into wires (A) or (B)?
(A)
White = LF Speaker amplified out (black line means -) [PIN 1 and 5]
Grey = RF Speaker amplified out (black line means -) [ PIN 2 and 6]
(B)
Green = Left speaker signal input from HU [PIN 3 and 9]
Purple = Right Speaker signal in from HU [PIN 4 and 10]
|
Use B as inputs. @
f0rge is correct. The white and grey wires will now be powered by your aftermarket Amp as these wires go directly to your door speakers (ie no filter exists between this harness and the door so set your HPF and LPF on your amp as you desire)