Quote:
Originally Posted by DNAPoPo
Did you use the speaker outputs or HU signal to wire to your sub amp?
I was thinking to take these below and convert to RCA and use as sub output from HU, since BRZ HU does not have RCA out, will this work?
Green = Left speaker signal input from HU [PIN 3 and 9]
Purple = Right Speaker signal in from HU [PIN 4 and 10]
|
Easiest route: Buy an amp with High Level inputs
Slightly more advanced:
A line output converter. Because its a full signal you can use it on speakers or a sub with appropriate crossover points. Only problem is the "Sub" volume control on whatever headunit you are running will have no effect. You would have to boost the lower frequencies yourself, which is often possible on line converters (many have built in eq's) or your HU.
:happy0180: